HOME WEB NEWS IMAGES CLASSIFIEDS YELLOW PAGESPOLLS - SURVEYS WIKI COUNTRIES PHOTOS US UK INDIA
Cities Stocks Weather Movies Coupons Travel Blogs Health Horoscope Maps ASIA EUROPE Classifieds Yellow Pages
|
 1
|
A 3.8 cm (1.5 in) OLED Screen
An organic light-emitting diode (OLED), also Light Emitting Polymer (LEP) and Organic Electro-Luminescence (OEL), is any light-emitting diode (LED) whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple "printing" process. The resulting matrix of pixels can emit light of different colors.
Such systems can be used in television screens, computer displays, portable system screens, advertising, information and indication. OLEDs can also be used in light sources for general space illumination, and large-area light-emitting elements. OLEDs typically emit less light per area than inorganic solid-state based LEDs which are usually designed for use as point-light sources.
A significant benefit of OLED displays over traditional liquid crystal displays (LCDs) is that OLEDs do not require a backlight to function. Thus they draw far less power and, when powered from a battery, can operate longer on the same charge. Because there is no need to distribute the backlight, an OLED display can also be much thinner than an LCD panel. OLED-based display devices also can be more effectively manufactured than LCDs and plasma displays. But degradation of OLED materials has limited the use of these materials.O. Prache, Active matrix molecular OLED microdisplays, DisplaysVolume 22, Issue 2, May 2001, Pages 49-56. [1]
Contents |
Bernanose and co-workers first produced electroluminescence in organic materials in the early 1950s by applying a high-voltage alternating current (AC) field to crystalline thin films of acridine orange and quinacrine.A. Bernanose, M. Comte, P. Vouaux, J. Chim. Phys. 1953, 50, 64A. Bernanose, P. Vouaux, J. Chim. Phys. 1953, 50, 261A. Bernanose, J. Chim. Phys. 1955, 52, 396A. Bernanose, P. Vouaux, J. Chim. Phys. 1955, 52, 509 In 1960, researchers at Dow Chemical developed AC-driven electroluminescent cells using doped anthracene.E. Gurnee, R. Fernandez, U.S. Patent 3,172,862, 1965
The low electrical conductivity of such materials limited light output until more conductive organic materials became available, especially the polyacetylene, polypyrrole, and polyaniline "Blacks". In a 1963 series of papers, Weiss et al. first reported high conductivity in iodine-doped oxidized polypyrrole.R. McNeill, R. Siudak, J. H. Wardlaw, D. E. Weiss, Electronic Conduction in Polymers. I. The Chemical Structure of Polypyrrole, Aus. J. Chem. 1963, 16, 1056B. A. Bolto, D. E. Weiss, Electronic Conduction in Polymers. I. The Chemical Structure of Polypyrrole, Aus. J. Chem. 1963, 16, 1056B. A. Bolto, R. McNeill, D. E. Weiss, Electronic Conduction in Polymers. III. Electronic Properties of Polypyrrole, Aus. J. Chem. 1963, 16, 1090 They achieved a conductivity of 1 S/cm. Unfortunately, this discovery was "lost"[clarify], as was a 1974 reportJ. McGinness, P. Corry, P. Proctor, Amorphous Semiconductor Switching in Melanins, Science 1974, 183, 853 of a melanin-based bistable switch with a high conductivity "ON" state. This material emitted a flash of light when it switched.
In a subsequent 1977 paper, Hideki Shirakawa et al. reported high conductivity in similarly oxidized and iodine-doped polyacetylene.H. Shirakawa, E. J. Louis, A. G. MacDiarmid, C. K. Chiang and A. J. Heeger, Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x, J. Chem. Soc., Chem. Commun. 1977, 578 - 580 Alan J. Heeger, Alan G. MacDiarmid & Hideki Shirakawa received the 2000 Nobel Prize in Chemistry for "The discovery and development of conductive organic polymers". The Nobel citation made no reference to the earlier discoveries.The Royal Swedish Academy of Sciences, Nobel Prize in Chemistry 2000, retrieved on July 28 2007
Modern work with electroluminescence in such polymers culminated with Burroughs et al. 1990 paper in the journal Nature reporting a very-high-efficiency green-light-emitting polymer.J. H. Burroughes, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. Mackay, R. H. Friend, P. L. Burn, A. B. Holmes, Light-emitting diodes based on conjugated polymers, Nature 1990, 347, 539 - 541
OLED technology was first developed at Eastman Kodak Company by Dr. Ching W. Tang using small molecules. The production of small-molecule displays often involves vacuum deposition, which makes the production process more expensive than other processing techniques (see below). Since this is typically carried out on glass substrates, these displays are also not flexible, though this limitation is not inherent to small-molecule organic materials. The term OLED traditionally refers to this type of device, though some are using the term SM-OLED.
Molecules commonly used in OLEDs include organo-metallic chelates (for example Alq3, used in the first organic light-emitting deviceC. W. Tang, S. A. VanSlyke, Organic electroluminescent diodes, Appl. Phys. Lett. 1987, 51, 913) and conjugated dendrimers.
Recently a hybrid light-emitting layer has been developed that uses nonconductive polymers doped with light-emitting, conductive molecules. The polymer is used for its production and mechanical advantages without worrying about optical properties. The small molecules then emit the light and have the same longevity that they have in the SM-OLEDs.
Polymer light-emitting diodes (PLED), also Light-Emitting Polymers (LEP) and Flexible OLED (FOLED), involve an electroluminescent conductive polymer that emits light when connected to an external voltage source. They are used as a thin film for full-spectrum color displays and require a relatively small amount of power for the light produced. No vacuum is required, and the emissive materials can be applied on the substrate by a technique derived from commercial inkjet printing.T. R. Hebner, C. C. Wu, D. Marcy, M. H. Lu, J. C. Sturm, Ink-jet printing of doped polymers for organic light emitting devices, Appl. Phys. Lett. 1998, 72, 519J. Bharathan, Y. Yang, Polymer electroluminescent devices processed by inkjet printing: I. Polymer light-emitting logo, Appl. Phys. Lett. 1998, 72, 2660 The substrate used can be flexible, such as PET.G. Gustafsson, Y. Cao, G. M. Treacy, F. Klavetter, N. Colaneri, A. J. Heeger, Flexible light-emitting diodes made from soluble conducting polymers, Nature 1992, 357, 477 Thus, flexible PLED displays may be produced inexpensively.
Typical polymers used in PLED displays include derivatives of poly(p-phenylene vinylene) and poly(fluorene). Substitution of side chains onto the polymer backbone may determine the color of emitted lightA. J. Heeger, in W. R. Salaneck, I. Lundstrom, B. Ranby, Conjugated Polymers and Related Materials, Oxford 1993, 27-62 or the stability and solubility of the polymer for performance and ease of processing.R. Kiebooms, R. Menon, K. Lee, in H. S. Nalwa, Handbook of Advanced Electronic and Photonic Materials and Devices Volume 8, Academic Press 2001, 1-86
Phosphorescent OLED (PHOLED) uses the principle of electrophosphorescence to convert up to 100% of the electrical energy in an OLED into light.
Patternable organic light-emitting device (POLED) uses a light or heat activated electroactive layer. A latent material (PEDOT-TMA) is included in this layer that, upon activation, becomes highly efficient as a hole injection layer. Using this process, light-emitting devices with arbitrary patterns can be preparedJ. Liu, L. N. Lewis and A. R. Dugal. "Photoactivated and patternable charge transport materials and their use in organic light-emitting devices." Appl. Phys. Lett. 90, 233503 (2007).
See "PLED" section.
Color patterning by means of laser, such as RISTM.Boroson et al., "Non-Contact OLED Color Patterning by Radiation-Induced Sublimation Transfer (RIST)", SID2005 Digest, p.972, 2005.
For a high resolution display like a TV, a TFT backplane is necessary to drive the pixels correctly. Currently LTPS-TFT (Low temperature poly silicon) is used for commercial AMOLED displays. LTPS-TFT has variation of the performance in a display, so various compensation circuits have been reported. T.Sasaoka et al., "A 13.0-inch AM-OLED Display with Top Emitting Structure and Adaptive Current Mode Programmed Pixel Circuit (TAC)," SID Digest, Vol.32, pp.384-387, June 2001 Due to the size limitation of Excimer laser process used for LTPS, AMOLED size was limited. To cope with the hurdle related to the panel size, amorphous-silicon/microcrystalline-silicon backplane have been reported with large display prototype demonstrations. 。T.Tsujimura et al., "A 20-inch OLED Display Driven by Super-Amorphous-Silicon Technology," SID Digest, Vol.34, pp.6-9, May 2003F.Templier et al, "Development of nanocrystalline silicon thin film transistors with low-leakage and high stability for AMOLED displays", IDMC2006 Digest, p.1705, 2006
Bottom emission uses transparent or semi-transparent bottom electrode to get the light through transparent substrate. Top emissionW.Graupner et al., "High Resolution Color Organic Light Emitting Diode Microdisplay Fabrication Method", SPIE Proceedings 4207, 11-19 (2000)T.Sasaoka et al., "A 13.0-inch AM-OLED Display with Top Emitting Structure and Adaptive Current Mode Programmed Pixel Circuit (TAC)," SID Digest, Vol.32, pp.384-387, June 2001 uses transparent or semi-transparent top electrode to get the light through counter substrate.
Transparent organic light-emitting device (TOLED) uses a proprietary transparent contact to create displays that can be made to be top-only emitting, bottom-only emitting, or both top and bottom emitting (transparent). TOLEDs can greatly improve contrast, making it much easier to view displays in bright sunlight.It is used in Heads up displays.
Stacked OLED (SOLED) uses a pixel architecture that stacks the red, green, and blue subpixels on top of one another instead of next to one another as is commonly done in CRTs and LCDs. This improves display resolution up to threefold and enhances full-color quality.
In contrast to a conventional OLED, in which the anode is placed on the substrate, Inverted OLED (IOLED) uses a bottom cathode that can be connected to the drain end of n-channel TFT especially for the low cost a-Si TFT backplane useful in manufacturing of AMOLED display.Ta-Ya Chu, Szu-Yi Chen, Chao-Jung Chen, Jenn-Fang Chen and Chin H. Chen,Highly efficient and stable inverted bottom-emission organic light emitting devies, Appl. Phys. Lett. 2006, 89, 053503.
An OLED is composed of an emissive layer, a conductive layer, a substrate, and anode and cathode terminals. The layers are made of special organic polymer molecules that conduct electricity. Their levels of conductivity range from those of insulators to those of conductors, and so they are called organic semiconductors.
OLED schematic: 1. Cathode (−), 2. Emissive Layer, 3. Emission of radiation, 4. Conductive Layer, 5. Anode (+)
A voltage is applied across the OLED such that the anode is positive with respect to the cathode. This causes a current of electrons to flow through the device from cathode to anode. Thus, the cathode gives electrons to the emissive layer and the anode withdraws electrons from the conductive layer; in other words, the anode gives electron holes to the conductive layer.
Soon, the emissive layer becomes negatively charged, while the conductive layer becomes rich in positively charged holes. Electrostatic forces bring the electrons and the holes towards each other and recombine. This happens closer to the emissive layer, because in organic semiconductors holes are more mobile than electrons (unlike in inorganic semiconductors). The recombination causes a drop in the energy levels of electrons, accompanied by an emission of radiation whose frequency is in the visible region. That is why this layer is called emissive.
The device does not work when the anode is put at a negative potential with respect to the cathode. In this condition, holes move to the anode and electrons to the cathode, so they are moving away from each other and do not recombine.
Indium tin oxide is commonly used as the anode material. It is transparent to visible light and has a high work function which promotes injection of holes into the polymer layer. Metals such as aluminium and calcium are often used for the cathode as they have low work functions which promote injection of electrons into the polymer layer.R. H. Friend, R. W. Gymer, A. B. Holmes, J. H. Burroughes, R. N. Marks, C. Taliani, D. D. C. Bradley, D. A. Dos Santos, J. L. Brédas, M. Lögdlund, W. R. Salaneck, Electroluminescence in conjugated polymers, Nature 1999, 397, 121
Just like Passive-matrix LCD (PMLCD) versus Active-matrix LCD (AMLCD), OLED can be categorized into Passive-matrix OLED (PMOLED) and Active-matrix OLED (AMOLED). AMOLED requires a TFT backplane to switch ON/OFF the pixel and can make higher resolution and larger size display happen.
The radically different manufacturing process of OLEDs lends itself to many advantages over flat-panel displays made with LCD technology. Since OLEDs can be printed onto any suitable substrate using an inkjet printer or even screen printing technologies,D. A. Pardo, G. E. Jabbour, N. Peyghambarian, Application of Screen Printing in the Fabrication of Organic Light-Emitting Devices, Adv. Mater. 2000, 12, No. 17, 1249 they can theoretically have a significantly lower cost than LCDs or plasma displays. Printing OLEDs onto flexible substrates opens the door to new applications such as roll-up displays and displays embedded in fabrics or clothing.
OLEDs enable a greater range of colors, brightness, and viewing angle than LCDs, because OLED pixels directly emit light. OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90 degrees from normal. LCDs use a backlight and cannot show true black, while an "off" OLED element produces no light and consumes no power. Energy is also wasted in LCDs because they require polarizers which filter out about half of the light emitted by the backlight. Additionally, color filters in color LCDs filter out two-thirds of the light.
OLEDs also have a faster response time than standard LCD screens. Whereas a standard LCD currently has an average of 8-12 millisecond response time, an OLED can have less than 0.01ms response time. Samsung SDI, OLED - Passive Matrix (PM), retrieved on July 28 2007
The biggest technical problem for OLEDs is the limited lifetime of the organic materials. In particular, blue OLEDs historically have had a lifetime of around 14,000 hours when used for flat-panel displays, which is lower than typical lifetime of LCD, LED or PDP technology – each currently rated for about 60,000 hours, depending on manufacturer and model. But in 2007, experimental PLEDs were created which can sustain 400cd/m2 of luminance for over 198,000 hours for green OLEDs and 62,000 hours for blue OLEDs.Cambridge Display Technology, Cambridge Display Technology and Sumation Announce Strong Lifetime Improvements to P-OLED Material; Blue P-OLED Materials Hit 10,000 Hour Lifetime Milestone at 1,000 cd/sq.m, March 26, 2007, retrieved on January 03, 2008.
The intrusion of water into displays can damage or destroy the organic materials. Therefore, improved sealing processes are important for practical manufacturing and may limit the longevity of more flexible displays.
Sony 11-inch OLED, released in Japan at the end of 2007
At the Las Vegas CES 2007, Sony showcased 11-inch (28 cm, resolution 1,024×600) and 27-inch (68.5 cm, full HD resolution at 1920×1080) models claiming million-to-one contrast ratio and total thickness (including bezels) of 5 mm. Sony plans on releasing a commercial version of this television in Japan in December, 2007.Engadget, The Sony Drive XEL-1 OLED TV: 1,000,000:1 contrast starting December 1st, October 1 2007, retrieved on October 1 2007
Sony plans to begin manufacturing 1000 11-inch OLED TVs per month for market testing purposes.CNET News, Sony to sell 11-inch OLED TV this year, April 12 2007, retrieved on July 28 2007
On October 1 2007, Sony announced it will sell 11-Inch OLED TVs for 200,000 yen (1714 USD) from December 2007, only in Japan Nikkei News Sony To Sell 11-Inch OLED TVs For Y200,000 From Dec and with an initial production of 2000 units per month.
On May 25 2007, Sony publicly unveiled a video of a 2.5-inch flexible OLED screen which is only 0.3 millimeters thick.Australian IT, Sony bends video display, May 28 2007, retrieved on July 28 2007 The screen displayed images of a bicycle stunt and a picturesque lake while the screen was flexed.
The Optimus Maximus keyboard currently in development by the Art. Lebedev Studio is expected to use 113 48×48-pixel OLEDs (10.1×10.1 mm) for its keys.
OLEDs can be used in High-Resolution Holography (Volumetric display). Professor Orbit showed on May 12 2007, EXPO Lisbon the potential application of these materials to reproduce three-dimensional video.[citation needed]
OLEDs could also be used as solid-state light sources. OLED efficacies and lifetime already exceed those of incandescent light bulbs, and OLEDs are investigated worldwide as source for general illumination; an example is the EU OLLA project.OLLA project, EU OLLA website, retrieved on July 28 2007
On March 11, 2008 GE Global Research demonstrated the first successful roll-to-roll manufactured OLED, marking a major milestone towards cost effective production of commerial OLED technology. The 4 year, $13 million research project was carried out by GE Global Research, Energy Conversion Devices, Inc and the U.S. Commerce Department’s National Institute of Standards and Technology (NIST).Businesswire, [2] , retrieved on March 11, 2008 GE Global research blog,[3], retrieved March 11 2008
OLED technology is used in commercial applications such as small screens for mobile phones and portable digital audio players (MP3 players), car radios, digital cameras, and high-resolution microdisplays for head-mounted displays. Such portable applications favor the high light output of OLEDs for readability in sunlight, and their low power drain. Portable displays are also used intermittently, so the lower lifespan of OLEDs is less important here. Prototypes have been made of flexible and rollable displays which use OLED\'s unique characteristics. OLEDs have been used in most Motorola and Samsung color cell phones, as well as some Sony Ericsson phones, notably the Z610i, and some models of the Sony WalkmanElectronic News, OLEDs Replacing LCDs in Mobile Phones, April 7 2005, retrieved on July 28 2007. It is also found in the Creative Zen V/V Plus series of MP3 players. Nokia has also introduced recently some OLED products, including the 7900 Prism and Nokia 8800 Arte.
On October 1st, 2007, Sony became the first company to announce an OLED television, which was released in Japan in December 2007.Takenaka, Kiyoshi. "Sony to launch world\'s first OLED ultra-thin TV", Reuters, 2007-10-01. Retrieved on 2007-10-24.
Newer OLED applications include signs and outdoor lighting.CeeLite, [4], December 6, 2007
The second-generation flash-based Clix mp3 player, released in April 2007 by iRiver, displays video on a 320x240 2.2" AMOLED screen of 262K color.iRiver Product Page, [5], April 2007
Samsung unveiled a 31-inch OLED TV at the January 2008 CES in Las Vegas and is promising much larger screens to come. “We have the technological ability to make 40-inch OLED,” said a spokesman, before adding that it won’t be until 2010 that the company will be in a position to mass produce such panels.[citation needed]
Use of OLEDs may be subject to patents held by Eastman Kodak and others; Kodak has licensed its patents to other firms for commercialization.OLED-Info.com, Kodak | OLED-Info, retrieved on 28 July 2007
| | Electronics Portal |
| Display technology | |
|---|---|
| Video | Cathode ray tube · Digital light processing · Field emission · Laser TV · Light-emitting diode (organic) · Liquid crystal · Plasma · Surface-conduction electron-emitter (SED) · Vacuum fluorescent · Video projector |
| Non-video | Electronic paper · Flip-dot · Split-flap |
| 3D display | Stereoscopic · Autostereoscopic · Volumetric · Laser beam |
| Static media | Hologram · Movie projector · Neon sign · Slide projector |
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia
